Suspension Geometry

• Controls Toe Angle Movement

• Controls Camber Gain

• Controls Ride Height Movement

• Good geometry gives the springs, dampers, and anti-roll bars more influence than the geometry itself

The restrictor limits the amount of air an engine can use. The intake plenum smooths out the intake pulses, and makes it possible for other engines to compete with 4-cylinders. Asides on turbocharging.

The approach to understand what makes an engine run well is to look at the opening and closing of each valve. But whatever you want the valves to do, they’re actually doing something else, because you always have: Deflection, Inertia, and Vibration.

The very best drivers can go up to but not over the maximum lateral capability during braking and corner entry. As they smoothly come off the brakes, the lateral limit increases due to both the friction circle, and more balanced loads front/rear.